EN
- Overview
- Related Products
ADSS All Dielectric self supporting optical fiber cable are lightweight with small diameter and designed for aerial installation with lashing method. The loose tube design with a FRP member and steel tape for provides stable performance over a wide temperature range and is compatible with any telecommunication grade optical fiber.
* S-Z stranded (up to 144 fibers)
*G652D optical fiber
*FPR for center strength member
*Low attenuation, low dispersion, stable control of excess length makes the optical cable perfect mechanical and environmental properties.
*With simple structure easy to install
*PE or AT-PE sheath materials
*Designed in accordance with applicable industry technical specifications, standards and references including IEC and EN
| Fiber count: | 2~144 |
| Loose tube: | Colored fiber in PBT loose tube,filled with fiber gel |
| Central strength member: | Non-metallic strength member FRP(fiber reinforce plastic rod) |
| Waterproof layer: | Cable core filled with cable gel or water blocking tape,water blocking yarns |
| High-strength aramid yam: | Offers very high tensile strength,small diameter and light weight to fit different climate consitions and laying spans |
| Jacket: | Anti-tracking(AT) material or Polyethylene(PE) |
| Item | Parameter | |
| Cable type | ADSS | |
| Fiber attenuation(B1)(dB/km) | 1310nm | <0.35 |
| 1550nm | <0.20 | |
| Nominal cable outer dia(mm) | 13(typical) | |
| Nominal thickness of outer sheath(mm) | >1.7 | |
| Cable weight(kg/km) | 80~180 | |
| Young's modulus(GPa)(full cable cross-section) | 8~20(depending on span,load,ect) | |
| Thermal expansion coefficient(10-5/℃) | <10 | |
| Min.bending radius(mm)(D:cable dia) | Static:15DDynamic:25D | |
| Representative span(m) | 80~500 | |
