EN
When we are mounting the cable, the type of clamps we always use is ADSS tension clamp and suspension clamp. Understanding the fundamental differences between these two clamps will lead you to suspend them, and maintain them.
ç ADSS tension clamp and suspension clamp design are different, the function is also different. ADSS Hardware Fittings ADSS Tension Clamp are employed to connect ADSS cables and poles/towers (wooden,concrete and steel). They are lighter and less rigid than some other cables. The ADSS cable tension clamp keeps tension of the ADSS cable without causing any damage.
The suspension clamp, on the other hand, is fixed for heavier cables with more support. Cable Suspension Clamp, pole mounted or tower mounted. They are fixed to prevent the cable from sagging or breaking due to its own weight.
One major difference in contrast to the suspension clamp is the way of installation. During the process of being installed, the ADSS tension clamp is pinned on the cable and the fastened on the tower. The suspension clamp is rotating into the cable and bolted/screwed in place.
Where we use them, though, ADSS tension clamps are frequently employed where the cable cannot sag too much, in town or across rivers, for example. Subscribe The suspension clamps are used wherever the cable must be suspended from above, such as countryside, across a valley.
Care shall be exercised for mounting and maintenance for ADSS tension clamps, suspension clamps. We must adhere strictly to guidelines given by the manufacturer so that we may not hurt the cable or the support.
Regular checks are also required to check whether the clamps are damaged or worn out. We must replace immediately any broken clamp to prevent accidents or breakdown of the cable system.
When choosing between ADSS Hardware Fittings ADSS tension clamps and suspension clamps, a few things should be considered. The cable type, if the cable is going to be heavy, where you are going to use it and the weather you are going to expose it to all factor in the best clamp to use.
Finally, ADSS tension clamps and suspension clamps are needed in suspended ADSS. It is important to be aware of the difference between the two clamps and how and when to use each of them in order to ensure that the cable system remains safe and functioning as expected. Correct use and maintenance avoids accidents and problems. By taking all of these factors into account in deciding between the two necklaces, you can maintain the cable system functioning well.
